The update file "FRITZ.Repeater.xx.xx.image" on ftp.avm.de contains the latest FRITZ!OS (Firmware) for the FRITZ!Powerline 1240 AX.

**Attention:** This update file is only intended for use with FRITZ!Powerline 1240 AX!
Please follow the instructions at the end of this file to install the update.


```
Product: 	FRITZ!Powerline 1240 AX
Version:        FRITZ!OS 7.58
Language:       English, French, Italian, Spanish, Polish, German
Release Date:   23.07.2024
```

**Improvements and changes with FRITZ!OS 7.58**

- **Fixed:** In certain cases, interference occurred when using media receivers on the LAN port of the repeater
- **Fixed:** Network devices were sometimes incorrectly displayed as belonging to a guest network
- **Fixed:** The network connection could get lost permanently when devices with a specific chipset were used
- **Fixed:** Robustness when transmitting very small network packets (UDP) was increased
- **Fixed:** Sometimes repeater was briefly displayed with an incorrect IP address in the FRITZ!Box
- **Improved:** higher Powerline stability
- **Improved:** better Mesh integration

---

**History:**

**Improvements and Changes with FRITZ!OS 7.57**
- **Fixed** stability and security increased

**Improvements and Changes with FRITZ!OS 7.56**
- **Improved** - Optimized system performance and stability
- **Improved** - Corrections to details in the settings for individual names for the Wi-Fi networks
- **Improved** - Improvements for the channel selection settings
- **Fixed** - Repeaters sometimes used external NTP servers for initial time determination even if the upstreamFRITZ!Box offered an NTP server
- **Fixed** - Mesh Repeater operating mode: The "Select Wi-Fi Network" list did not display invalid Wi-Fi network names (SSID)
- **Fixed** - When adoption of settings was disabled, the repeater still adopted the "Wi-Fi" off from the Wi-Fi schedule (LAN bridge mode)
- **Fixed** - Reboot of the FRITZ!Repeater if the FRITZ!Box changes the Wi-Fi channel width from 160 to 40 MHz
- **Fixed** - Temporary decreased Wi-Fi performance after a reboot under certain conditions
- **Fixed** - WiFi GreenAP mode did not activate when WiFi was enabled an disabled several times
- **Fixed** - WiFi airtime detection could yield wrong results for 2,4 GHz
- **Fixed** - Problems while streaming live media (IPTV etc.) fixed
- **Fixed** - Incorrectly displayed Powerline MAC address under "Powerline"

---

---

**Enabling the Mesh Function**

To check whether a FRITZ! product is enabled for Mesh, see the "Mesh Overview" of the FRITZ!Box (the Mesh Master) under "fritz.box / Home Network / Mesh".
Here the products in the Mesh are designated with a corresponding "Mesh active" icon.

A FRITZ!Repeater or FRITZ!Powerline adapter can be enabled for Mesh in various ways:
- If the FRITZ!Repeater or FRITZ!Powerline adapter has the factory settings configured and is being connected with the FRITZ!Box via WPS for the first time, it will be automatically enabled for Mesh.
- If the FRITZ!Repeater or FRITZ!Powerline adapter is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box.
On the FRITZ!Box, use the button that initiates WPS: depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS" button for 6 seconds

Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq.


We recommend to always keep all your FRITZ!-Products up to date as every update also improves security features of FRITZ!Box and FRITZ!Repeater

---

(c) AVM GmbH 2004-2024. All rights reserved.

This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt).
The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de. 

AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use.
AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this AVM firmware packet to be
- copied, propagated, or in any other manner made publicly accessible, or
- processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner.


GHA 23/07/2024